home *** CD-ROM | disk | FTP | other *** search
- Path: howland.reston.ans.net!usc!usenet
- From: jangmauw@scf.usc.edu (Jang-Mau Wang)
- Newsgroups: comp.dcom.modems
- Subject: Re: Premier cannot connect at high speed
- Date: 17 Apr 1996 20:53:37 GMT
- Organization: University of Southern California, Los Angeles, CA
- Sender: jangmauw@comserv-g-50.usc.edu
- Message-ID: <4l3loh$4pf@usc.edu>
- References: <4l159u$pku@usc.edu> <4l321n$do2@news.cc.utah.edu>
- NNTP-Posting-Host: comserv-g-50.usc.edu
- Mime-Version: 1.0
- Content-Type: Text/Plain; charset=ISO-8859-1
-
- In article <4l321n$do2@news.cc.utah.edu>, marc.fuller@vissgi.cvrti.utah.edu
- says...
-
- >>I use win95 dial-up ppp connect to my school.
- >>In the past, my modem is Zyxel u1496E+, I can connect at 57600.
- >>This time I set Premier at 230400, then it won't dial, show up an error
- >I can't help you with your low data rate, but according to the manual
- >,you cannot establish a 230K connection to the modem unless
- >you issue a special command which is buried in the back of the manual.
-
- Yeah, I made it work now, just add *MM12 to initial string. And I found that
- there is lots of stuff about the AT command, what's the initial string you
- currently using?
-
-
- >I think the manual is not very good unless you are using Windows 95 (
- Really? I think except the manual mentioned where can we find the driver for
- win95, it doesn't supply any useful information. Or I will not encounter this
- problem...
- >I have it hooked up to a MAC, where they give a third of a page on how
- >to configure it). Also what the heck are you supposed with the little
- >ferrite clip on cylinder that comes with the modem, put it on your
- >data cable?
-
- I don't know, maybe to filter the noise on the data cable? (since that stuff
- will wrap the cable, I make this guess.)
-
-
- Helios
-
-